OMP8

Line Audio Design's OMP8

OMP 8channel rackmount microphone preamplifier
NEW VERSION!

Excellent audio quality, low noise discrete input stage.
Elctronically balanced XLR microphone inputs with 48V phantom (individually switchable).
Electronically balanced outputs through XLR.
Signal and clip indicator (fast, full wave clip detector).
The gain is adjusable up to to 60dB (separate for each channel).
PAD, -20dB on each channel
Equally perfect for live recording as well as studio recording!


Close this window
> Frequency resp. 15Hz - 100 KHz ± 0.5dB
Gain 60dB (Gain at max setting)
Mic inputs Electronically balanced
Input impedance >10Kohm
Input level max 1.8VRMS (180mV RMS with -20 disabled/out)
Outputs Electronically balanced
Output impedance 600 ohm (minimum recommended load 600ohm)
Output level max 15V RMS (electronically balanced)
Output DC offset max 1mV at 40dB gain, max 10mV at 60dBgain
Harmonic distortion: < 0.02%
Input noise: 128 dBm/dBu (100ohm termination 20KHz B/W)
Input noise: 133dBV (input shorted 20KHz B/W)
XLR Polarity Pin 1 ground, pin2 hot +, pin 3 cold -

Specifications may be subject to change without previous notice.


Close this window