Line Audio Design's SM3

SM SERIES SPECIFICATIONS:
TYPE Prepolarized condenser microphone
PHANTOM POWER 40-52V
FREQ. RESPONSE 20 - 20000 Hz
IMPEDANCE < 100 Ohm 1KHz
SENSITIVITY 7mV/PA -42dB (SM3L/ST6L 5.5mV/PA -44dB
S/N ratio (DIN/CCIR) 80dB(A)/66dB
MAX SPL 130dB (SM3L/ST6L 127 dB)
CURRENT CONSUMPTION 3.5 mA
CONNECTOR 3 PIN XLR (pin1 GND, pin 2+, pin3 -)
SIZE 140mm x 47mm
WEIGHT 320g (850g boxed, with elastic holder)

Large membrane area, low noise STUDIO CONDENSER MICROPHONES. In SM6 Double sets of our triple casule (totally 6 membranes!) are used to acheive switchable omni, cardioid and figure 8 patterns.
The triple capsule membrane combines the low noise of a large membrane with the fast and detailed response of smaller membranes, which besides their fine tonal quality are tougher and not as easily destroyed.
Switchable highpass filter to compensate for the proximity effect of the Cardioid/Figure8 patterns.
Switchable 120Hz 12dB/oct Highpass filter.
Switchable gain: 0 or -15dB.
Elastic holder included!



Available models:
SM6 (double cartridges).
SM3 (single cartridge) CARDIOD only version.
SM3L(single cartridge) CARDIOID only version without switches.
ST6L -CARDIOID STEREO X/Y mic with double (L+R) XLR outputs, without switches.