Line Audio Design's DMP

DMP DUAL MICROPHONE PREAMP
-Dual channel version of our highly acclaimed OMP!
(The DMP has replaced the former DP1 Pre-amp)

2 channel, compact, low noise MICROPHONE PRE AMPLIFIER.
Excellent audio quality, low noise discrete class A transistor differential pair input stage.
Electronically balanced XLR microphone inputs with 48V phantom (individually switchable).
Electronically balanced XLR outputs.
Signal and clip indicator (fast, accurate full wave clip detector).
The gain is adjusable up to to 60dB (separate for each channel).
PAD, -20dB on each channel.

Power requirement 15-18VAC 7VA
External 230VAC transformer included

Frequency resp. 15Hz - 100 KHz ± 0.5dB
Gain 60dB (Gain at max setting)
Mic inputs Electronically balanced
Input impedance >10Kohm
Input level max 1.8VRMS (180mV RMS with -20 disabled/out)
Outputs Electronically balanced
Output impedance 600 ohm (minimum recommended load 600ohm)
Output level max 15V RMS (electronically balanced)
Output DC offset max 1mV at 40dB gain, max 10mV at 60dBgain
Harmonic distortion: < 0.02%
Input noise: 128 dBm/dBu (100ohm termination 20KHz B/W)
Input noise: 133dBV (input shorted 20KHz B/W)
XLR Polarity Pin 1 ground, pin2 hot +, pin 3 cold -

Specifications may be subject to change without previous notice.